Ryobi 310BVr Uživatelský manuál stáhnout pdf (Strana 8)

ASSEMBLY INSTRUCTIONS

BLOWER TUBE AND NOZZLE ASSEMBLY

WARNING: Do not install tubes while unit is

running to avoid serious personal injury.

1. Align the grooves in the blower tube with the pins in

the blower outlet.

2. Grasping the tube firmly with both hands, push the

tube into the blower outlet (Fig. 1). Turn the tube

clockwise until it snaps into the detent and locks.

3. Align the pins of the blower nozzle with the grooves

in the blower tube (Fig. 2).

4. Grasping the nozzle firmly with both hands, push the

nozzle onto the blower tube. Turn the nozzle

clockwise until it snaps into the detent and locks.

NOTE: The blower tube and nozzle or vacuum bag

(Model 310BVr only) must be used at all times to

prevent overheating the engine.

INSTALLING THE VACUUM BAG/TUBE

ASSEMBLY (MODEL 310BVr ONLY)

WARNING: Rotating impeller blades can

cause severe injury. Do not attempt to

convert the unit while the engine is running

to avoid serious personal injury. Do not put

hands or any other object into the vacuum

tubes while they are installed on the unit.

1. Remove the blower tubes.

2. Align the grooves in the vacuum bag/elbow tube

assembly with the pins in the blower outlet.

3. Grasping the tube firmly with both hands, push the

vacuum bag/elbow tube assembly into the blower

outlet (Fig. 3). Turn the assembly clockwise until it

snaps into the detent and locks. The curve of the

adapter tube should angle upwards.

(3>

Fig.3

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Žádné komentáře

Ryobi 310BVr Uživatelský manuál Strana 8