Ryobi JM82 Uživatelský manuál stáhnout pdf (Strana 22)

22 23

MAINTENANCE

CLEANING THE BASE ASSEMBLY AND DUST

PATH

See Figures 25 - 27.

After extended use, wood particles and resin may build up

inside the base assembly of your biscuit joiner and clog the

path for wood particles going into dust bag. Wood particles

packing up in this area not only defeats the dustless feature

of your biscuit joiner, it also makes cutting biscuit slots more

difficult.

n Unplug the biscuit joiner.

n Remove the dust bag.

n Place the biscuit joiner upside down on a workbench.

n Using a screwdriver, remove the four screws and washers

securing the shoe. Remove the shoe.

n Remove the blade. See “Replacing the Blade.”

n With the blade removed, place the biscuit joiner right side

up. Using a pair of needle nose pliers, stretch and release

the springs from the tabs on the bearing plate.

Fig. 25

SHOE

DUST BAG

PORT

SCREW(S)

Fig. 26

PLIERS

SPRING

SHOWN WITHOUT DUST BAG

1 2 ... 17 18 19 20 21 22 23 24 25 26

Žádné komentáře

Ryobi JM82 Uživatelský manuál Strana 22