Ryobi D41 Návod k obsluze

Procházejte online nebo si stáhněte Návod k obsluze pro Elektrické nářadí Ryobi D41. Ryobi D41 Operator`s manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 16
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your drill has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
Votre perceuse été conçue et fabriquée conformément à nos strictes
normes de fiabilité, simplicité d’emploi et sécurité d’utilisation.
Correctement entretenue, elle vous donnera des années de
fonctionnement robuste et sans problème.
AVERTISSEMENT : Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre le
manuel d’utilisation avant d’employer ce produit.
Merci de votre achat.
Su taladro ha sido diseñada y fabricada de conformidad con las
estrictas normas para brindar fiabilidad, facilidad de uso y seguridad
para el operador. Con el debido cuidado, le brindará muchos años
de sólido y eficiente funcionamiento.
ADVERTENCIA: Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
Le agradecemos su compra.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
3/8 in. DRILL
PERCEUSE 10 mm (3/8 po)
TALADRO DE 10 mm (3/8 pulg.)
D41
Zobrazit stránku 0
1 2 3 4 5 6 ... 15 16

Shrnutí obsahu

Strany 1 - OPERATOR’S MANUAL

SAVE THIS MANUAL FOR FUTURE REFERENCEYour drill has been engineered and manufactured to our high standard for dependability, ease of operation, and op

Strany 2 - WARRANTY

INSTALLING BITSSee Figure 3 - 4. Unplug the drill. Open or close the chuck jaws to a point where the open-ing is slightly larger than

Strany 3 - GENERAL SAFETY RULES

uNlOck(ReleAse)DRIll BIT chuckJAWs chuck BODylOck(TIGhTeN)RIGhTchuckcOllAROPERATIONWRONGREMOVING BITSSee Figure 3. Unplug the drill. R

Strany 4 - SPECIFIC SAFETY RULES

OPERATIONleVelleVelDRILLINGSee Figure 6 - 7.Levels are located on the top and end of the motor housing to help keep the drill bit level du

Strany 5

WARNING:When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.WA

Strany 6 - SAVE THESE INSTRUCTIONS

MAINTENANCECHUCK REMOVAL See Figure 8.The chuck may be removed and replaced with a new one. Unplug the drill.  Insert a 5/16 in. or la

Strany 7 - ELECTRICAL

NOTES

Strany 8 - FEATURES

983000-809D41• Prior to requesting service or purchasing replacement parts, please obtain your model and serial numb

Strany 9 - ASSEMBLY

TABLE OF CONTENTSINTRODUCTIONThis product has many features for making its use more pleasant and enjoyable. Safety, performance, and depend

Strany 10 - OPERATION

GENERAL SAFETY RULESWARNING!Read all instructions. Failure to follow all instructions listed below may result in electric shock, fir

Strany 11

Hold power tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own

Strany 12

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-pretation of these symbo

Strany 13 - MAINTENANCE

SYMBOLSSERVICEServicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service

Strany 14

EXTENSION CORDSWhen using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capac

Strany 15 - 

FEATURESPRODUCT SPECIFICATIONSChuck Capacity ....1/16 in. to 3/8 in.Switch ...

Strany 16

WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could r

Komentáře k této Příručce

Žádné komentáře