Ryobi HD500 Specifikace stáhnout pdf

OWNER'S OPERATING MANUAL

1/2 in. (13 mm) Hammer Drill - HD500

DOUBLE INSULATED

SAVE THIS MANUAL FOR FUTURE REFERENCE

THANK YOU FOR BUYING A RYOBI HAMMER DRILL.

Your new hammer drill has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation,

and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

CAUTION: Carefully read through this entire owner's manual before using your new hammer drill. Pay close

attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your hammer drill properly and only for what

it is intended, you will enjoy years of safe, reliable service.

Thank you again for buying Ryobi tools.

SPECIFICATIONS:

Chuck Capacity 5/64 in. (2 mm) - 1/2 in. (13 mm)

Horsepower 3/8

Rating 220 volts, 50 Hz, AC only, 1.75 Amperes

No Load Speed 0-1200 RPM

Hammer Speed 0-19,200 BPM

Hammer Travel .025

Switch Adjustable Variable Speed/Reversible

1 2 3 4 5 6 ... 13 14

Shrnutí obsahu

Strany 1 - OWNER'S OPERATING MANUAL

OWNER'S OPERATING MANUAL1/2 in. (13 mm) Hammer Drill - HD500DOUBLE INSULATEDSAVE THIS MANUAL FOR FUTURE REFERENCETHANK YOU FOR BUYING A RYOBI HAM

Strany 2 - RULES FOR SAFE OPERATION

Page 10WARNING:Always wear safety goggles or safety glasses with sideshields when operating hammer drill. Failure to do socould result in dust, shavin

Strany 3 - READ ALL INSTRUCTIONS

Page 11CHUCK REMOVALCHUCK REMOVALSee Figures 12, 13, and 14.Whenever necessary to remove the chuck for replacement,etc., use the following procedure f

Strany 4 - WARNING:

Page 12MAINTENANCEGENERALAvoid using solvents when cleaning plastic parts. Most plas-tics are susceptible to damage from various types of commer-cial

Strany 5

Page 13NOTES

Strany 6

972000-401 8-97 Printed In U.S.A.OWNER'S OPERATING MANUAL1/2 in. (13 mm) Hammer Drill - HD500DOUBLE INSULATED• SERVICENow that you

Strany 7

Page 2TABLE OF CONTENTS1. Product Specifications ... 12. Table Of Cont

Strany 8

Page 3READ ALL INSTRUCTIONS1. KNOW YOUR POWER TOOL. Read owner'smanual carefully. Learn its applications andlimitations as well as the specific p

Strany 9

Page 4RULES FOR SAFE OPERATION (Continued)authorized service center unless indicatedelsewhere in this instruction manual.31. DO NOT USE TOOL IF SWITCH

Strany 10 - OPERATION

Page 5APPLICATIONS(Use only for the purposes listed below)1. Hammer drilling in concrete and masonry.2. Drilling in wood.3. Drilling in ceramics, plas

Strany 11

Page 6SWITCHSee Figure 2.To turn your hammer drill ON, depress the switch trigger.Release switch trigger to turn your hammer drill OFF.LOCK-ON BUTTONS

Strany 12 - MAINTENANCE

Page 7VARIABLE SPEEDSee Figure 5.Your hammer drill has a variable speed control selectordesigned to allow operator control and adjustment of speedand

Strany 13

Page 8OPERATIONINSTALLING AUXILIARY HANDLE (Continued)4. Align tabs on depth gage clamp with slots in threadedhole in motor housing. NOTE: Depth gage

Strany 14

Page 9RIGHTOPERATIONWARNING:Your hammer drill should never be connected to powersupply when you are assembling parts, makingadjustments, installing or