Ryobi SSP200 Uživatelský manuál stáhnout pdf

how to get started

WARNING: This How To Get Started sheet is

not a substitute for reading the operator’s manual.

To reduce the risk of injury or property damage, user

must read and understand operator’s manual before

using this product.

Lubricate the piston.*

Fill sprayer with paint/stain.

Choose proper spray tip.

Use the 1 in. round fan tip for

latex paints and stains. This

tip sprays in a round pattern.

Use the 12 in. wide fan tip for

latex paints, oil-based paints,

and stains. This tip sprays in

a wide pattern that can be

adjusted from horizontal to

vertical.

Plug in the sprayer.

Spray on scrap material to prime.

Paint as desired, keeping the tip of the sprayer

12 inches away from the surface.

Unplug the sprayer.

Return unused paint or stain to original container

for short or long term storage.

Clean sprayer.

For detailed instructions on how to perform any of

the steps below, please see the operator’s manual.

988000-023

03-01-10 (REV:01)

*For best performance lubricate piston after every use.

1 2

how to get started WARNING: This How To Get Started sheet is not a substitute for reading the operator’s manual. To reduce the risk of injury or

PoUr dÉBUter L’UtILIsatIoN dU ProdUIt AVERTISSEMENT : Le présent feuillet intitulé « Pour débuter l’utilisation du produit » ne remplace en aucu

Další dokumenty pro Nástroje Ryobi SSP200

Žádné komentáře