Ryobi SGL1150 Uživatelský manuál stáhnout pdf

OPERATOR'S MANUAL

4-1/2 in. (115 mm) Angle Grinder

Model SGL1150 / Double Insulated

SAVE THIS MANUAL FOR FUTURE REFERENCE

THANK YOU FOR BUYING A RYOBI ANGLE GRINDER.

Your new angle grinder has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation,

and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

CAUTION: Carefully read through this entire operator's manual before using your new angle grinder.

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your grinder properly and only for

what it is intended, you will enjoy years of safe, reliable service.

Please fill out and return the Warranty Registration Card so that we can be of future service to you.

Thank you again for buying Ryobi tools.

SPECIFICATIONS:

Grinding Wheel Capacity 4-1/2 in. (115 mm)

Spindle Thread Size 5/8-11 UNC

Rating 120 volts, 60 Hz, AC

No Load Speed 11,000 RPM

Amperes 6.6 Amperes

Net Weight 4.0 lbs. (1.8 kg.)

1 2 3 4 5 6 ... 12 13

Shrnutí obsahu

Strany 1 - OPERATOR'S MANUAL

OPERATOR'S MANUAL4-1/2 in. (115 mm) Angle GrinderModel SGL1150 / Double InsulatedSAVE THIS MANUAL FOR FUTURE REFERENCETHANK YOU FOR BUYING A RYOB

Strany 2 - TYPICAL APPLICATION

Page 10Fig. 8TRIGGER SWITCHLOCK-ONBUTTON5° TO 15°OPERATIONworkpiece. Start your grinder and let the motor and grindingwheel build up to full speed. Gr

Strany 3 - GENERAL SAFETY RULES

Page 11WARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause productdamage.MAINTENA

Strany 4 - SAVE THESE INSTRUCTIONS

Page 12LUBRICATIONAll of the bearings in this tool are lubricated with a sufficientamount of high grade lubricant for the life of the unit undernormal

Strany 5 - FEATURES

OPERATOR'S MANUAL4-1/2 in. (115 mm) Angle GrinderModel SGL1150 / Double Insulated972000-700 6-01RYOBI TECHNOLOGIES, INC.1428 Pearman Dairy R

Strany 6 - UNPACKING

Page 2 Product Specifications ...1 Typical Applica

Strany 7

Page 3GENERAL SAFETY RULESgloves away from moving parts. Loose clothes, jew-elry, or long hair can be caught in moving parts. Avoid accidental starti

Strany 8 - ADJUSTMENTS

Page 4SAVE THESE INSTRUCTIONSRULES FOR SAFE OPERATIONrecommended for an extension cord 100 feet or lessin length. A cord exceeding 100 feet is not rec

Strany 9 - GUARD LOCATION

Page 5SYMBOLS SYMBOL NAME DESIGNATION/EXPLANATIONV Volts VoltageA Amperes CurrentHz Hertz Frequency (cycles per second)W Watt Powermin Minutes TimeA

Strany 10 - WARNING:

Page 6With the exception of the side handle and grinding wheel,your angle grinder has been shipped completely assembled. Carefully remove the grinder

Strany 11 - MAINTENANCE

Page 7KNOW YOUR ANGLE GRINDERBefore attempting to use your grinder, familiarize yourselfwith all operating features and safety requirements.See Figure

Strany 12

Page 8WARNING:Your grinder should never be connected to power supplywhen you are assembling parts, making adjustments,installing or removing grinding

Strany 13

Page 9Fig. 4INCORRECTLOCATION OF GUARDADJUSTMENTSCORRECTLOCATION OF GUARD ISBETWEEN POINTS A AND BWARNING:Do not attempt to operate this tool until yo