Ryobi D130VR Specifikace stáhnout pdf

OWNER'S OPERATING MANUAL

1/2 in. (13 mm) Electric Drill

Model D130VR Type II

Double Insulated

SAVE THIS MANUAL FOR FUTURE REFERENCE

THANK YOU FOR BUYING A RYOBI DRILL.

Your new drill has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and

operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

CAUTION: Carefully read through this entire owner's manual before using your new drill.

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your drill properly and only for what

it is intended, you will enjoy years of safe, reliable service.

Thank you again for buying Ryobi tools.

SPECIFICATIONS:

Chuck Capacity 1/16 in. (1.6 mm) - 1/2 in. (13 mm)

Switch Adjustable Variable Speed/Reversible

Rating 120 volts, 60 Hz, AC

Input 5.0 Amperes

No Load Speed 0-550 RPM

Net Weight 5.1 lbs. (2.3 kg.)

1 2 3 4 5 6 ... 11 12

Shrnutí obsahu

Strany 1 - Model D130VR Type II

OWNER'S OPERATING MANUAL1/2 in. (13 mm) Electric DrillModel D130VR Type IIDouble InsulatedSAVE THIS MANUAL FOR FUTURE REFERENCETHANK YOU FOR BUYI

Strany 2 - RULES FOR SAFE OPERATION

Page 10CHUCK REMOVALSee Figures 10, 11, and 12.Whenever necessary to remove the chuck for replacement,etc., use the following procedure for chuck remo

Strany 3

Page 11MAINTENANCEGENERALAvoid using solvents when cleaning plastic parts. Mostplastics are susceptible to damage from various types ofcommercial solv

Strany 4

972000-398OWNER'S OPERATING MANUAL1/2 in. (13 mm) Electric DrillModel D130VR Type IIDouble Insulated• SERVICENow that you have purchased your too

Strany 5

Page 2TABLE OF CONTENTS1. Product Specifications ... 12. Table Of Cont

Strany 6

Page 3READ ALL INSTRUCTIONS1. KNOW YOUR POWER TOOL. Read owner'smanual carefully. Learn its applications andlimitations as well as the specific p

Strany 7

Page 4be properly repaired or replaced by anauthorized service center unless indicatedelsewhere in this instruction manual.31. DO NOT USE TOOL IF SWIT

Strany 8

Page 5APPLICATIONS(Use only for the purposes listed below)1. Drilling in wood.2. Drilling in ceramics, plastics, fiberglass, and laminates.3. Drilling

Strany 9

Page 6POWERCORDSWITCHSee Figure 2.To turn your drill ON, depress the switch trigger. Releaseswitch trigger to turn your drill OFF.LOCK-ON BUTTONSee Fi

Strany 10 - OPERATION

Page 7VARIABLE SPEEDSee Figure 5.Your drill has a variable speed control selector designed toallow operator control and adjustment of speed and torque

Strany 11 - MAINTENANCE

Page 8RIGHTOPERATIONWARNING:Your drill should never be connected to power supplywhen you are assembling parts, making adjustments,installing or removi

Strany 12

Page 9WARNING:Always wear safety goggles or safety glasses with sideshields when operating drill. Failure to do so could resultin dust, shavings, or l